|
| Scuba
Gear Close Outs - Yes this is New, in the Box, With full Manufacturer's
Warranty, Gear! When They're Gone... They're Gone! |
| Mares Proton 32 Metal Dive Regulator |
|
Complete range of regulators with metal second stages, manufactured in corrosion-proof nickel- and chrome-plated brass.
The metal second stages have better performance in cold water, thanks to the high thermal conductivity that limits the freezing effect.
The presence of the metal in the body of the second stage noticeably decreases abrupt changes in temperature. In fact, metal is a good conductor of temperature, and makes the water surrounding the second stage act as a heating element for the air inside.
Strange as it may seem, the water, even at a temperature of just a few degrees above freezing, may be considered "warm" in comparison with the air expanding inside the second stage.
DFC makes it possible to minimize the intermediate pressure drop during the inhalation phase. This phenomenon is all the more marked when higher airflow is demanded of the regulator. The DFC system substantially reduces breathing effort and inhalation resistance, especially during deep dives and under demanding conditions.
SCS System
The first stage valve features a spherical seal for greater duration and safety. The SCS system practically erases the danger of violent and uncontrolled free-flow caused by abnormal wear on the seal valve.
Features
•First Stage Weight: 856g
•Second Stage Weight: 243g
•Oil/Dry CWD Kit : Oil
•Balanced Diaphram First Stage
•Number of HP Ports: 2 hp 7/16" UNF Ports
•Number of LP Ports: 1 LP 1/2" UNF Port (Primary) 3 LP 3/8" UNF Ports
•SCS System
•VAD System
•DFC System
•All Metal Mesh Regulator Cover
Usually ships the same business day
Manufacturer:
Mares
Item Code:
416109
|
| |
$399.96
|
|
|
|
|
| Bare 0.5mm Thermalskin Skin Wetsuit for Women |
|
When Bare showed us these suits I told them I didn't have room for another high-end suit, but then they showed us the retail price and we couldn't believe it. The suits have an excellent fit and cut, the seams are undetectable.
This 0.5mm Thermal skin has the best cut for guys who have a little extra or who keep a "consistent panda bear shape." This suit makes any guy look stunning and the yellow is perfect because it isn't neon yellow or solar yellow, its more under toned for today's fashion. Look at the features of these suits. Thermalskin Features •0.5mm neoprene with Thermalskin inner surface •Heavy-duty, non-corroding zipper backed with an internal flap •New! Duraskin II Lower leg protection •Adjustable Glide-seal neck •100% flat seam construction throughout
•Colors: Yellow/Black •Sizes: 6, 8, 10, 12, 14, 16
Contact us for availability
Manufacturer:
Bare
Item Code:
2410
|
| |
$89.95
|
|
|
| Bare 0.5mm Thermalskin Full Wetsuit for Men |
|
When Bare showed us these suits I told them I didn't have room for another high-end suit, but then they showed us the retail price and we couldn't believe it. The suits have an excellent fit and cut, the seams are undetectable.
This 0.5mm Thermal skin has the best cut for guys who have a little extra or who keep a "consistent panda bear shape." This suit makes any guy look stunning and the yellow is perfect because it isn't neon yellow or solar yellow, its more under toned for today's fashion. Look at the features of these suits. Thermalskin Features •0.5mm neoprene with Thermalskin inner surface •Heavy-duty, non-corroding zipper backed with an internal flap •New! Duraskin II Lower leg protection •Adjustable Glide-seal neck •100% flat seam construction throughout
•Colors: Yellow/Black •Sizes: Small, Medium, Medium-Large, Large, X-large, XX-Large
Usually ships the same business day
Manufacturer:
Bare
Item Code:
2110
|
| |
$109.95
|
|
|
| Bare Velocity 3mm / 2mm Hydro-Stretch Wetsuit for Women |
|
When Bare showed us these suits I told them I didn't have room for another high-end suit, but then they showed us the retail price and we couldn't believe it. The suits have an excellent fit and cut, the seams are undetectable.
The Velocity 3/2mmsuit is made of 3mm of N2S neoprene and 2mm of Hydrostretch arm and back panels. The suit is comfortable, watertight, and has an adjustable glide-skin neck seal. Features •3mm N2S Neoprene •2mm Hydrostretch •Glideseal neck •Heavy Duty PK Back and Ankle Zippers •Anatomically contoured knees and lower legs •Lumare-x-tender panel in lower back •Armor-flex lower leg protection •Glued and blind stitched
Sizes and Colors
•Womens Sizes: 6, 8, 10, 12, 14, 16, 18 •Colors: Yellow/Black
Usually ships the same business day
Manufacturer:
Bare
Item Code:
2424
|
| |
$129.95
|
|
|
| |
|
|
Dive Rite Transpac Harness Scuba BCD 2006 Model
Features •Harness system securely keeps tank close to diver •2" webbing allows divers to fasten a variety of pockets, rings and accessories •Tough enough for steel doubles •Perfect travel BC, folds very small •Weighs almost nothing compared to standard jacket BC's •Weight integration available
•Transpac Size Chart
Usually ships the same business day
|
Your Price:
$250.00
|
|
|
| Dive Rite Rec Wing |
|
Red Rec Wing are a single bladder air cell which can be used with both single and double cylinders. This wing can accommodate up to two 104-cubic-foot/16 litre back-mounted cylinders. They also incorporate a built-in gusset-control cord to help divers manage the shape and lift capacity of the air cell. Rec Wings are a good choice for divers who, while they may primarily use doubles, want to be able to configure their air cell for use with single cylinders as well. •51 lbs, 23 kgs lift •27 inch inflator hose with power inflator •Now Available in Red, Blue and traditional black
Usually ships the same business day
Manufacturer:
Dive Rite
Item Code:
bc2074
|
| |
$355.95
|
|
|
| Dive Rite Classic Wing 2006 Model |
|
Classic Wing is diving's first air cell designed specifically for use with double cylinders. They provide up to 59 pounds/27 kg of lift. They are designed for use with medium- to heavyweight doubles (Classic Wings should not be used with single cylinders). These wings can accommodate up to two 104-cubic-foot/16 litre back-mounted cylinders, and one 80-cubic-foot/11 litre stage bottle. A 22-inch/56cm low-pressure inflator hose is standard. Available in Black, Blue and Red. •Classic Wing is popular among many hard-core cave divers, who appreciate its simple, streamlined, time-tested design.
Contact us for availability
Manufacturer:
Dive-Rite
Item Code:
bc2030
|
| |
$200.00
|
|
|
| Rebel Scuba BC |
|
•Special polyurethane fabric, waterproof, doesn't absorb water
•Back mount/with contoured shoulder straps
•Weight integrated
•48 lbs of lift
•Adjustable cummerbund
•Adjustable Air Cell reducer system
•Pre-bent D rings
•Carrying handle
•Gear bag rings
•Padded lumbar support & backpack pad
•Tank height adjuster strap
Usually ships the same business day
Manufacturer:
UTC Sports
Item Code:
bc2074
|
| |
$299.00
|
|
|
| |
|
| |
|
| |
|
| |
|
|
Dive Rite Round Scuba Gear Regulator Bag - 2007 Model
|
|
Why round? Well, think about the optimal shape of your regulator hoses when you're carrying or laying down. This bag helps the hoses keep their shape without kinking or stretching. It also features an inner pocket, handle and of course Dive-Rite's Logo.
Usually ships the same business day
|
|
$34.95 |
|
|
|
|